production and use of Plast wood
Production of plywood as it exists today began about 20 years ago. Since then, its use has been continuously increased in various industries. To the extent that many factories around the world are currently producing plywood for use in the construction industry, urban furniture, shipbuilding and automotive industries .
Obviously, the popularity of using this valuable product during the last 2 decades in the world and also in our beloved country is not without any reason.
Therefore, Van Wood Group has been producing Wood Plast (based on PVC and polyethylene for 2 years) for many years and is currently one of the most famous producers of Plast wood profiles in Iran, which is proud to export to countries in the region and The Persian Gulf, as well as the countries of South Africa, are included in the Van Wood Group’s portfolio.
In the following, some reasons for the increase in plywood production as well as its popularity in recent years will be presented in our country.
1- The appearance of playwood is beautiful
In the production process of polywood, this product is produced using the extruder method and simultaneously or after production with embossed rollers of wood design or (embossing) or (brushing) is engraved on wood plastics, so in addition to being very similar It looks like wood, it creates a very beautiful appearance.
Van Wood Group’s embossed design is engraved on the products online (simultaneously with the production of Plast wood profiles).
2- Production of plywood in a way that makes it very durable
Wood of different tree species has different resistances. Even in one species and in a tree, resistance is different. Its resistance also depends on the type and direction of the force applied to the wood vein. The wood has a very good density and tensile performance in the direction of the vein, but it is very weak against the force perpendicular to the vein. The different strengths of wood are related to the living tree, which grows according to its conditions and needs. That is why the quality of timber varies based on environmental factors such as climate, rainfall and local factors such as land conditions and forest management practices.
In the production process of plywood, due to the fact that a large percentage of the materials used are synthetic, which also have uniform properties, the physical properties of the produced product will also be more uniform. Also, if in certain situations the need for a unique property such as resistance is very high, these changes can be made by making changes in synthetic materials. Achieving the desired quality.
In addition, due to the structure of plywood, its strength is well and evenly distributed and with high production pressure by extruder method and production of profiles is integrated, which of course has a high density and high strength. .
3- Very large polywood (plastic wood) van wood
In the production of plywood, the conditions are adjusted in such a way that unlike wood, regardless of the direction, the final product has uniform resistance in all directions. Also, resistance to adverse physical and chemical conditions makes this product much more durable than wood.
Also, the use of coatings will significantly increase the impact resistance of sharp objects, scratches and..
Note: The cover is used only for the door and frame as well as the cabinet top (tops plate).
4- The material used in the production of plywood makes it lighter
This product, despite its acceptable strength and durability, is surprisingly lighter than wood. This makes this product very suitable for use in furniture. Because weight is a very important characteristic in evaluating the quality of furniture.
* Note: The weight of the product is completely different according to the type of profile and its use, the weight of the profiles is listed in the price list section.
5- Production of plywood in large sizes
When using wood in the manufacture of furniture, we often encounter the problem of not having pieces of wood that are large enough. But in the production of polywood, we try to produce parts with standard dimensions and large sizes up to 1800 mm in length and 1200 mm in width. Therefore, it is possible to use this product in a much larger range than wood.
Also, due to the production process of Plast wood, it is possible for customers to announce the length of the profiles to the Plast Van Wood production group so that Van Wood can produce the profiles according to the dimensions required by the customer, this will cause the drop to fall below 2%. Which is at least about 15% less than wood, which itself plays a very important role in the superiority of Plast wood material with natural wood with thermo wood.
6. Plywood covers a large area
Because plywood is produced in large dimensions and sizes. This product can easily cover the required dimensions. Therefore, you will not have any gaps or uneven ends. Also, material loss will be minimal (throw rate below 2%).
production and use of Plast wood
7- Plywood is not easily separated in different parts
One of the major disadvantages of working with wood is that the wood tends to separate easily at the joints. However, due to the cross-sectional production of plywood, it is not possible to divide and separate its different parts as well as from the bottom surface.
8- Plywood is great for curved surfaces
When was the last time you made curved surfaces with wood? Probably never, but if you have tried something like this, the results do not seem to be great. When creating curved surfaces with wood, the edges are likely to be uneven. And after finishing the work, there is a need to grate and sand. Which is very time consuming. But playwood has the ability to easily cover any curved or curved surface.
In any case, plywood is an excellent material for architects in designing and manufacturing furniture and various parts of the building.
It should be mentioned that wood plastics can be easily bent by using a nozzle and catching a direct flame behind the profile or plastic wood lumber.
The production of plywood and its use in industry creates more added value.
You can make sure that when you use Plywood for any project, there will be very little waste. You can also use a standard sheet per square centimeter.
Best of all, the price of playwood will always be lower than that of thermowood. Therefore, the final product is affordable and this makes this product more popular among homeowners and builders these days.
Playwood Van Wood is very effective in preserving the environment.
To say that plywood is one of the most environmentally friendly man-made products may seem a bit exaggerated. Certainly wood is used in the production of plywood. But plywood production requires less wood than all-wood products.
This means that more wood is saved, which makes plywood a more environmentally friendly product. It is very important given the worrying state of the environment and the world.
The production of doors and frames for polywood (Plast wood) is also on the agenda of Van Wood Group, and this group has been able to carry out many projects in the field of doors.
To see the projects and examples of doors and frames of Playwood Van Wood, refer to the following link
production and use of Plast wood
Van Wood is a manufacturer of various types of Plast wood profiles in Iran
02126753345
09383603809